AIR-EAGLE
®
SR
2.4GHz RF Receiver
MODEL 38-20800-DC
OPTIONS & FREQUENCY SET-UP
This unit is shipped from the factory with the SEL1 switches in the open
positions. If you wish to change the default settings, follow the instructions
on the table below.
1) Remove power from unit and remove top cover.
2) Select desired relay operation and/or network frequency using table
below.
3) Reattach cover and apply power. Programming is now complete.
UNIT CONFIGURATION
SEL1
SWITCH
NUMBER
OPEN
CLOSED
SW1
Relays #1 thru #8
maintained momentary
(default)
Relays #1 thru #8
toggle/latch
Maintained Momentary
– Relay mimics button or input – when
depressed or closed, relay will be energized; when released, relay de-
energizes
Toggle Latch
– Relay changes (and holds) its state each time the
corresponding button or input is depressed or closed.
SW2
Not used on this model
SW3
Vibrating Feedback OFF
(default)
Vibrating Feedback ON
SW4
Relays respond to channel
1 thru 8 commands
(default)
Relays respond to channel
9 thru 16 commands
FREQUENCY SET-UP
SEL1
(SW5-7)
Network
Frequency
SW5
SW6
SW7
1
(default)
OPEN
OPEN
OPEN
2
CLOSED
OPEN
OPEN
3
OPEN
CLOSED
OPEN
4
CLOSED
CLOSED
OPEN
5
OPEN
OPEN
CLOSED
6
CLOSED
OPEN
CLOSED
7
OPEN
CLOSED
CLOSED
8
CLOSED
CLOSED
CLOSED
SPECIFICATIONS
DC Input
9 - 36 VDC @ 10 Watts
Relay Contacts
SPDT 5 amp @ 120VAC or 30VDC
Fuse Protected
1 amp
Receiver Frequency
2.4 GHz Spread Spectrum
Receiver Range
Up to 600 Feet
Note: Max range figures are estimates, based on free-air terrain with limited sources of
interference. Actual range will vary based on transmitting power, orientation of transmitter and
receiver, height of transmitting antenna, height of receiving antenna, weather conditions,
interference sources in the area, and terrain between receiver and transmitter, including, but not
limited to, indoor and outdoor structures such as walls, metal objects, trees, buildings, hills, and
mountains
RF Networks
Eight independent network frequencies
Operating Temperature
-40
o
F to +185
o
F
Enclosure
Hinged fiberglass with window / NEMA
4, IP66
Weight
Approx 2 lbs.
DIMENSIONS
ACCESSORIES
Standard Antenna (Included):
2.4GHz TNC
“Rubber Duck” Antenna
49-1201
Mobile/Base Antennas
–
Used to help achieve max range in both non line of sight and line of
sight applications. - Contact BWI Eagle for recommendations
2.4GHz Thru-Hole Mount Mobile Antenna
49-2201
2.4GHz Magnet Mount Mobile Antenna
49-2202
2.4GHz Omni Directional Base Antenna
49-3201
2.4GHz Yagi Directional Base Antenna
49-3202
High Quality Coax Cables
–
Used to connect external high gain antennas to control unit
Flex Coax Cable w/Connectors
– Available in
5’,15’,25’,30’,40’,60’,80’,100’ Lengths
49-4000-XX
(XX = # of
Feet)
Bulkhead Extensions
–
Used to provide an external antenna connection when mounting
control unit inside another enclosure
TNC Male to TNC Bulkhead Cable Assembly -
Available in 2’, 4’, 7’ Lengths
49-5004-X-ISO
(X = # of Feet)
LIMITED WARRANTY STATEMENT
BWI Eagle Inc. warrants the Air-Eagle XLT Remote Control System, if properly used and installed,
will be free from defects in material and workmanship for a period of 1 year after date of purchase.
Said warranty to include the repair or replacement of defective equipment. This warranty does not
cover damage due to external causes, including accident, problems with electrical power, usage not
in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or
improper testing. This limited warranty, and any implied warranties that may exist under state law,
apply only to the original purchaser of the equipment, and last only for as long as such purchaser
continues to own the equipment. This warranty replaces all other warranties, express or implied
including, but not limited to, the implied warranties or merchantability and fitness for a particular
purpose. BWI Eagle makes no express warranties beyond those stated here. BWI disclaims without
limitation, implied warranties of merchantability and fitness for a particular purpose. Some
jurisdictions do not allow the exclusion of implied warranties so this limitation may not apply to you.
To obtain warranty service, contact BWI Eagle for a return material authorization. When returning
equipment to BWI Eagle, the customer assumes the risk of damage or loss during shipping and is
responsible for the shipping costs incurred.
DOCUMENT DATE: 10/14/2021 / PRODUCT REV. 4
Содержание AIR-EAGLE SR 38-20800-DC
Страница 3: ......
