25
GasAlertQuattro
Device Configuration
Startup Message
Enter text to display on the detector LCD during startup (50 characters
maximum). Enter information such as employee name, plant, area,
emergency number(s), etc.
Note
To make a line break to force text to the next line, as in the
example above, press the
|
(pipe or vertical bar) key.
Lockout on Self-Test Error
If
Lockout on Self-Test Error
is enabled and a failure occurs during the
self-test, the following screen displays and the detector deactivates.
To enter normal operation, the sensor must be operating correctly.
Refer to
and
The detector is shipped with
Lockout on Self-Test Error
disabled.
Safe Mode
If enabled,
SAFE
displays continuously on the LCD unless an alarm
condition occurs.
If an alarm occurs, the LCD displays the alarm condition and the
real-time readings for each sensor.
Confidence/Compliance Beep
If enabled, the Confidence/Compliance Beep provides continuous audi-
ble confirmation that the detector is operating correctly. Frequency of the
beep is defined with the
Confidence/Compliance Beep Interval
option
(every
1
-
120
seconds).
Note
Confidence/Compliance Beep automatically disables during a
low battery alarm, self-test fail, calibration fail, bump test fail,
and when an alarm event occurs.
