BW Technologies GasAlertMicro 1, Руководство пользователя

Страница: 51 / 76

GasAlertMicro
If the Detector Does Not Work
If the Detector Does Not Work
The detector’s electronics are protected from variations in
humidity and corrosive atmospheres. If you encounter a
problem, try the solutions listed in the following table.
If you are still unable to correct the problem, contact
BW Technologies
(see P.2)
Table 13. Troubleshooting Tips
Problem Possible Cause Solution
Detector does not turn on.
No batteries.
Depleted batteries.
Damaged or defective detector. →
Install batteries. See the section
“
Replacing the Batteries .”
→
Replace batteries. See the section
“
Replacing the Batteries .”
→
Contact BW Technologies (see P.2)
Detector enters alarm immediately
when turned on. Sensor needs to stabilize.
Low Battery Alarm.
Sensor Alarm. →
Used sensor: wait 60 seconds
New sensor: wait 5 minutes
→
Replace batteries. See the section
“
Replacing the Batteries .”
→
Replace sensor. See the section
“
Replacing a Sensor or Sensor
Filter .”
Activation self-test fails during one of
the first five steps. General fault. →
Contact BW Technologies (see P.2)
39