BW Technologies GasAlertMicro 1, Руководство пользователя

Страница: 46 / 76

GasAlertMicro
Users Manual
Maintenance
To keep the detector in good operating condition, perform
the following basic maintenance as required:
• Calibrate, bump test and inspect the detector at regular
intervals.
• Keep an Operations Log of all maintenance, calibrations,
bump tests and alarm events.
• Clean the exterior with a soft damp cloth. Do not use
solvents, soaps or polishes.
• Do not immerse the detector in liquids.
Replacing the Batteries
a
Warning
To avoid personal injury:
⇒
Replace the batteries as soon as the detector emits
a Low Battery Alarm.
⇒
Use only batteries recommended by
BW Technologies to prevent damage or personal
injury.
⇒
Use only approved batteries, properly installed in
the detector case. See the section
”
Specifications ” for approved batteries.
⇒
Charge batteries using only a recommended
charger. Do not use any other charger. Failure to
observe this precaution could lead to fire or
explosion.
⇒
Do not change or charge batteries in a hazardous
location. Doing so will impair the intrinsic safety of
the unit, and may lead to fire or explosion.
34