BW Technologies GasAlertMicro 1, Руководство пользователя

Страница: 24 / 76

GasAlertMicro
Users Manual
The detector starts recording the maximum gas exposure
and calculating the STEL (short-term exposure level) and
TWA (time-weighted average) exposures. If the SAFE
display is activated,
SAFE will scroll across the screen.
Self-Test Fail
If the detector fails the self-test, see the section “ If the
Detector Does Not Work ”.
Battery Test
The batteries are tested on activation and continuously
thereafter. Battery power is continually displayed during
normal operation. If battery power is low,
LOW flashes.
Note: If the Confidence Beep is on, the audible alarm beeps
if the batteries have sufficient power and stops if the battery
power is low. See the section
Confidence Beep
Datalogger Operation
Datalogger operation is automatic and requires no settings.
The MultiMediaCard icon
S
is displayed continuously in
datalogger units when the card is present. The card is not
required for operation of the User Downloadable Datalogger
models. A warning message will display if the card is absent.
Deactivating the Detector
⇒ To turn off the detector, press
A
and hold for 5 seconds.
The audible alarm beeps four times, the visual alarm flashes
four times and then the display shows:
The display turns off and the detector stops normal
operation.
Note: If
A
is held down for less than 5 seconds, the detector
will not turn off.
12