Version 202001 Updated 08/2020
７
The cutting tool is very sharp. Not following the instructions may cause
severe damage.
Keep this machine maintained and in proper condition. Check that the
moving parts are not misaligned or locked, that there are no broken parts or
other conditions that may affect the operation of this machine. Whenever
this machine is damaged, repair it before use. Many accidents are caused
by poorly maintained machines.
Check:
- The machine completely and look for loose and damage parts (screws,
nuts and etc).
- Engine oil level.
- Damaged and /or defective welded parts.
Make sure that the machine undergoes adequate maintenance controls. All
damage caused by the use of defective, worn out or non original parts,
annuls the warranty responsibility of the manufacturer.
Keep your face and body as far away from the machine as possible. Whilst
introducing the wood into the machine for shredding, maintain both feet at
the same level as those of the wheels.
Turn off the machine, disconnect the spark plug and make sure that the
cutting tool has stopped before making any adjustments, filling with fuel,
changing accessories, cleaning transportation and storage of this machine.
Such preventive safety measures reduce the risk of accidental starting of
this machine.
Never tilt the machine when the engine is running.
Replace the caution signs if damaged or if not legible.
Do not tilt the machine with the engine running.
Reduce the engine speed when shutting down the engine, and if the engine
has a petrol closing valve, then close this valve when the engine is not
running.
