Rev01 10/31/2019
Introduction
The 30 Ton Rosin Press is a pneumatic-operated, dual heating Rosin Press. Featuring automatic press
and timing operation, this unit is designed with the professionals in mind. Please read this user
manual carefully and keep it for future reference. If you need any assistance, please contact us at
[email protected]
Safety Information
Carefully read all warnings and instructions, and inspect unit for damage prior to use. Do not use if
the unit appears damaged, bent, warped, cracked, or otherwise unsafe for operation.
Warning!
Shock hazard. Do not open or modify electrical equipment. No user serviceable parts.
Warning!
Crush/pinch hazard. Keep hands clear of pressing plates.
Caution
: Plates may be hot!
Figure 1: 30,000lb ROSIN PRESS
1:
Pneumatic Foot Pedal
2:
Upper Heat Plate
3:
Lower Heat Plate
4:
Timer Start Button
5:
PID Controller
Getting Started
Unbox and place the unit and pedal on a sturdy surface. After inspecting the unit and removing the
foam shipping pad between the plates, connect the supplied power cable. When the unit is switched
on, the screens will take a few seconds to boot, then it will enter Display Mode and begin to heat.