19
USER’S MANUAL
CERTIFICATE OF WARRANTY
&
• Products should be installed only by authorized persons.
• Installation of the product to be specified in the Project location to the
Wall or flor must be securely mounted. If mounted on the wall, it should
mounted with bracket or with clamps.
• Fan blades to be above 2,3 m from the flor must be installed.
• Fan can not be installed outside the window or wall.
• Open thegas pipe or other fuel-burning devices inside of the room to
avoid there flux of gas is necessary to take pre-measures. It is recom-
mended that gloves be worn in the assembly of products.
• The product must be connected to the input and output channels.
• Electrical cords definitely turn off the power before connecting.
• When mounting brackets and mounts all the connections are made cor-
rectly to carry the weight of the product, make sure you have the strength.
• Even if the product off the main power supply is switched off when con-
necting equipments make sure that.
• Before mounting the electrical connection indicated on the product in-
formation (voltage, power, frequency, etc..) In the place of assembly are
in keeping with that note.
• There is noob struction on theAir flow way.
• Interms of safety ground terminal located on the terminal must be con-
nected to earth certainly building.
• Motor thermal and overload relay make sure they are connected properly.
• Product wiring, electrical connections must be as in the diagram.
• Contact separation in all poles along with a switch that must be con-
nected to fixed wiring installations in accordance with the rules.
• If the product will be used in a dusty and oily working environment, it
must be used with a filter.
• Not advised to use of forward-curved blade fan for using dusty and oiled
exhaust application, advised to use fresh air supply application
BRF-V_klavuz2020.qxp_Layout 1 7.12.2020 11:24 Page 22