Ultra Bandit EVO
Assembly & Operation Manual
BVM ® 2019
3
11/12/2019
UNPACKING
Carefully remove items from the box. Open each package and inspect for shipping
damage. After reading this entire manual, get familiar with the major kit components.
Note:
Damaged parts must be reported to BVM within 7 days of receiving your kit.
Become familiar with the work completed at the factory. It is important that you inspect and
approve this work now.
Using a stand, such as the BVM Ultra Bandit Jet Foam Cradle (K7300-65) will aid in the
assembly of the Ultra Bandit Evo.
Carbon Dowel Preparation
Use BVM Dry Lube (BVM# 1947) on the
Carbon Rods to allow easier installation
into the wing and tail receptacles.
