BVM GO FLY GOLD F-86 Sabre, Сборка и руководство по эксплуатации, Страница: 12 / 20

F-86 Sabre
Assembly & Operation Manual
BVM ® 2020 9
The BVM Demo Sabre utilizes the Cortex
Pro. We mounted the Cortex on the right
side of the aircraft.
Note: In this configuration the orientation
of the Gyro will have to be changed in
the software.
Mounting the RX
In the BVM demo Sabre we used a
Spektrum 20ch Power Safe RX
(SPMAR20310T)
Mounting of the Rx was done with (4) small Ply
discs and (4) Servo Screws. The Ply discs
where glued to the fuse using BVM QTPlus
This is also mounted on the right side of the
fuselage.
Note: If you mount anything in the middle
of the tray, check your clearance since the
inlet sits there.
Mounting the Switch and Fill Valve
The BVM Demo F-86 uses a side mounted
Switch Mount that holds the RX Switch, Air Fill
Valve and Gauge.
RECEIVER