BroadcastVision Entertainment : www.broadcastvision.com
Tel (888) 330-4283, Email: [email protected]
Page 2
PROGRAMMING INSTRUCTIONS
1) POWER ON
: If the display is off, press the “Power” button in the lower right corner of the keypad to
turn the unit on.
2) PROGRAM 863MHz or 900MHZ PRESETS CHANNELS
a) Tell the receiver which type 900 MHz transmitter for your application:
(Most new applications are SERIES 2)
For the BVE SERIES 1 transmitter Press and Hold EQ and ‘1’ simultaneously for 5 seconds.
For the BVE SERIES 2
transmitter Press and Hold EQ and ‘2’ simultaneously for 5 seconds.
For operation with Cardiotheater LCS transmitter, Press and Hold “EQ” + “8” simultaneously for
5 seconds.
For operation with Cardiotheater
xTV transmitter, Press and Hold “EQ” + “9” simultaneously for
5 seconds.
For operation with Mye or Fantaay brand transmitter, Press and Hold “EQ” + “4” simultaneously
for 5 seconds.
b) The display will show “ch01”and will be flashing to indicate this channel is not saved. If you clearly
hear the audio that you want as channel 1, press the ‘*’ key to save this channel. The display will stop
flashing indicating the channel is now saved.
c) To advance to the next channel, press the VOL UP key. Press the ‘*’ key for each channel (up to 32
channels) to be saved (i.e.: turn from flashing to solid).
d) Simply press the volume up button to bypass unused channels. If an unused channel is
i
nadvertently selected, press the ‘star’ button again to toggle back to a flashing scenario.
e) Press and hold EQ and PREV simultaneously for 5 seconds to exit 863MHz or 900MHz Preset
programming mode.
3) PROGRAM FM PRESET CHANNELS
Exercisers can enjoy listening to STRONG local FM radio stations in addition to the audio channels
preset above.
a) To enter FM programming mode, p
ress and Hold EQ and PREV simultaneously for 5 seconds. The
left most and right most decimal points will appear indicating you are in the FM Preset Channel
Program. Note that the first preset number displayed is the first one that is available for presetting with
an FM frequency. That is, the first available preset that does not have a 900MHz channel preset in that
slot.
b) Press the SEEK button (or use the channel or number buttons) to find a strong FM radio station to
save as a preset.
c) Press the ‘*’ key to save the desired FM frequency to the corresponding preset number.
d) Repeat steps b and c above until all desired (CLEAR, STRONG reception) FM radio stations are
saved as presets (up to 32 channels).
e) Press and hold EQ and PREV simultaneously for 5 seconds to exit FM Preset programming mode.
