2
SAFETY AND GENERAL INFORMATION
Save these instructions.
For your safety, read and understand the information contained within. The owner and operator shall
have an understanding of this product and safe operating procedures before attempting to use this product. Make certain that the
operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If any doubt exists as
to the safe and proper use of this product as outlined in this factory authorized manual, remove from service immediately.
Inspect before each use.
It is recommended that, prior to each use, an inspection be done by qualified personnel and that
any missing or damaged parts, decals, warning / safety labels or signs be replaced with factory authorized replacement parts
only. Any pump that appears to be damaged in any way, is worn, leaking or operates abnormally shall be removed from service
immediately until such time as repairs can be made. Any pump that has been or suspected to have been subject to a shock load
(a load dropped suddenly, causing the system pressure to exceed 10,000 PSI), shall be removed from service immediately until
checked by qualified personnel. Owners and operators of this equipment shall be aware that the use and subsequent repair of
this equipment may require special training and knowledge.
PRODUCT DESCRIPTION
BVA Hydraulics Gas Engine Pump is engineered to meet most industrial standards for Performance and Safety. These pumps
provide hydraulic power when electricity and air power are not available.
These pumps supply compressed hydraulic fluid to
compatible applications i.e. rams, presses, spreaders, compactors and crimping machines, anywhere that 10,000 PSI of fluid
pressure is needed.
Special skill, knowledge and training may be required for a specific task and the product may not be suitable
for all the jobs described above. Unsuitable applications would include applications that call for a device to move, level or support
persons, animals, hazardous materials, mobile homes/ dwellings in general, mirrors and/or plate glass, and/or to connect/secure
hatches, components, etc. between bulkheads. The user must make the decision regarding suitability of the product for any given
task and assume the responsibility of safety for himself and others in the work area.
NOTICE: Please refer to gas engine owner's manual for engine information
.
WARNING
:
To reduce the risk of personal injury and/or property damage, ensure that the rated working pressure of each
pressurized attachment be equal to or greater than the rated working pressure developed by the hydraulic pump.
CAUTION: Always check connections before using. Alteration of these products is strictly prohibited. Use only those
adapters, attachments and accessories provided and approved by the manufacturer.
!
!
Figure 1 - Model PG70M3N05 Components
Control Valve Lever
Oil Dipstick Cap
Frame
Hydraulic Oil Cap
(not shown, located on
reservoir)
Control Valve
Oil Output Ports
3/8"-18NPTF
Carry Handle
Drain Plug
Hydraulic Oil Reservoir
Engine Starter Grip
Fuel Cap
Gas Engine
