1
Installation and Operator’s Manual
8895560
Drill-free 3rd Brake Light
Light Bar Mount
Works on Ford Ranger SuperCrew
('19+), F-150 (15+), F-250-550 ('17+)
with all types of 3rd Brake Lights
www.buyersproducts.com
Phone (440) 974-8888
Fax 800-841-8003
Safety Precautions
Do not install and/or operate this Light Bar Mount unless you
have read and understand the information contained in this
Installation and Operator’s Manual.
This symbol points out important safety instructions which, if not
followed, could endanger the personal safety and /or property of
yourself and others. Read and follow all instructions in this manual
before attempting to install or operate the vehicle with Light Bar.
Failure to comply with these instructions may result in personal
injury. When you see this symbol. HEED ITS WARNING!
WARNING
Improper installation and operation could cause personal injury,
and/or property damage. Observe the following safety Precautions
before, during and after operating this Light bar Mount. By follow-
ing this precautions and common sense, possible injury to persons
and potential damage to this Light Mount may be avoided.
WARNING
Cancer and Reproductive Harm
For more information go to www.P65Warnings.ca.gov
WARNING
1.
Proper installation combined with vehicle operator training in
the use, care, and maintenance of the Light Bar Mount are essen-
tial to ensure the safety of you and others.
2.
Use caution when working with live electrical connections.
3.
Proper placement and installation are both critical to the per-
formance of this Light Bar Mount. Install this product so that out-
put performance of the mount and lighting system is maximized,
and the lighting controls are placed within convenient reach of the
operator so that one can operate the lighting system without los-
ing eye contact with the roadway.
4.
It is the responsibility of the vehicle operator to ensure during
use that all features of this product work correctly. In use, the
vehicle operator should ensure the projection of the mount-
ed warning signal is not blocked by vehicle components (i.e.,
open trunks or compartment doors), people, vehicles, or other
obstructions.
5.
The use of this or any other warning device does not ensure all
drivers can or will observe or react to a warning signal. Never take
the right-of-way for granted. It is the vehicle operator’s responsi-
bility to be sure one can proceed safely before entering an inter-
section, driving against traffic, responding at a high rate of speed,
driving on or around traffic lanes.
6.
This Light Bar Mount is intended for use by authorized person-
nel only. The user is responsible for understanding and obeying all
laws regarding warning signal devices. The vehicle operator shall
check all applicable city, state, and federal laws and regulations.
The Light Bar Mount manufacturer assumes no liability for any
loss resulting from the use of this Light Bar Mount system.
7.
The maximum recommended vehicle speed for safe operation
using the Light Bar Mount is 80 mph (129 km/h) or POSTED SPEED
LIMIT. Higher speeds could cause the mount to fail, which could
cause damage to the mount vehicle or other vehicles, and injury or
death to the driver, passengers, and/or bystanders.
8.
The Light Bar Mount is not designed to be weather-proof in the
event of pressure washing, high pressure mechanical car washing,
or other forces beyond normal highway operation.
9.
It is the responsibility of the vehicle owner and operator to
inspect the Light Bar Mount monthly to be certain the clamping
system remains secure and the weather resistant gasketing is
secure and functioning. Replace any worn or damaged parts.
10.
The Light Bar Mount is designed to provide a mounting plat-
form for lighting, antennas, and GPS devices. In no way is this
Light Bar Mount to be used as a load bearing rack for ladders, sup-
plies or other equipment. The weight restriction of the Light Bar
Mount is 30 lbs maximum.
light bar not included
