4 EN
Functions
ANC and Voice assistant
Left headphone: press twice to turn on / off ANC (silent mode not available).
Turning ANC on or off is indicated by a voice alert (ANC ON or ANC OFF)
Right headphone: press twice to activate the voice assistant function
Safety precaution:
The noise canceling function is only effective at frequencies from 100 to 800 Hz, such as
engine noise, trains, or office noise, etc. Be careful when using it in a busy and hazardous
environment. Under no circumstances should you use the ANC function in situations
where rapid reactions and perception of the surroundings are needed (e.g. cycling,
driving a car, or in other situations where the perception of the surroundings must not
be reduced).
Calling
Press briefly to answer / end the call.
Press and hold to reject an incoming call.
Music playback
Press briefly to pause / resume playback.
Press and hold the left headphone to skip to the previous track.
Press and hold the right headphone to skip to the next track.
ON / OFF
Press and hold (25 seconds) to turn on the headphones.
Insert the headphones into the charging station to turn off the headphones.
Warning:
Do not use headphones for extended periods of time at higher volume. This can cause an
irreversible damage to your hearing.
Do not use headphones while driving, cycling, or in other situations where rapid reactions
are required or reactions to the surroundings must not be reduced.
Headphones charging
Bluetooth headphones are charging in the charging station. During charging, the LED
indicator lights up. Once the battery is recharged fully, the LED turns off.
Charging the charging station
The charging station is equipped with an LED charge indicator, which is displayed during
both charging and recharging.
Charge status:
Always charge the station with 5 V DC.
