EN 5
4. Putting into operation
Before fi rst use, be sure to read the safety instructions
contained in this user’s manual carefully.
Before fi rst use, please charge the BT speaker to a maximum
level. Hold down the power On button to turn on the BT
speaker. Turning on/off is indicated by a sound signal. To turn
the BT speaker off , hold down the power On button.
Caution:
After a longer period of inactivity, the appliance will
turns itself off .
5. Pairing devices via Bluetooth
Turn on the BT speaker and search for its Bluetooth name
“BBS 4400” in the device you want to pair and start the pairing
process. If you are requested to enter a pairing code while your
device and the BT speaker are pairing, use the code: “0000”.
To disconnect a paired device, end the pairing session on your
mobile device.
Note:
To ensure a stable Bluetooth connection, make sure
that the distance between the BT speaker and your connected
device is kept within 10 meters.
Caution:
Some connected devices support common volume
setting. If some of the connected devices do not support this
feature, the volume setting will operate separately on each
device.
6. TWS function
If you buy another Bluetooth speaker (“BBS 4400”), you can
pair both speakers together for optimum stereo sound. First,
make sure your device is not connected to any BT speaker.
Switch on both BT speakers by pressing the TWS button
(No. 5) on one of them 2 times and wait until the speakers
automatically pair together. The main speaker on which TWS
pairing has been initiated will be set as the left channel. The
red LED indicator will stop fl ashing and light up when the BT
speakers are paired, successful pairing will be accompanied by
an audible “true wireless paired” signal.
Changing the volume level using the volume control buttons will
take eff ect automatically on both paired BT speakers. Pressing
and holding the Power On button on one of the speakers will
turn both paired speakers off .
Note:
If the BT speakers are not successfully paired, press
and hold the TWS button on both speakers until the speakers
indicate “true wireless cleared”.
7. Audio AUX IN
The BT speaker is equipped with a 3.5mm jack. Your device
can be connected to the BT speaker via the supplied audio
cable. First connect the audio plug to your device and then to
the BT speaker’s jack.
