Page 2 of 2
Now hook the Tablet Holder onto your Control
Panel Bracket. If you haven’t done so already, we
recommend the use of a long Velcro strip (that
came with your robot) to secure the Control Pan-
el Bracket onto your table. This will help prevent
knocking the tablet off the table, which could
then crack its screen or otherwise damage it.
Attach the Tablet Power Supply to the power
port of your tablet. This will keep your tablet
fully charged and will allow the screen to stay ac-
tive during your entire training session. You may
need to use an extension cord to go from the wall
outlet to the table as the cord on Tablet Power
Supply is not very long.
Alternatively, you can also power the tablet using
a USB micro cable plugged into a common USB
charger (user supplied). The charger should have
an output of 5V and at least 1500 mA (1.5A).
Press and hold down on the tablet’s power but-
ton until the screen becomes active, then let go of
the button. After about 2 minutes, the tablet will
display the Exercise Screen within the Amicus
app (see next photo).
Look at the Robot icon at the bottom of the
screen. If it shows connected ( ), then you’re
all set to go and you can select any exercise and
start playing it, or begin creating your own cus-
tom exercise.
But if the Robot icon shows disconnected ( ),
tap on that icon to open the Connection Manager.
If Amicus BTLE is listed at the top, tap the Con-
nect
button and the connection should be made
and the Robot icon will show connected ( ).
If you do not see Amicus BTLE listed, verify
that the robot is connected to power (using
the Robot Power Supply) and also check that
Settings
>Location and Settings>Bluetooth are both
turned on. Go to Settings by tapping the open
circle ( ) at the very bottom and then the circle
with 6 dots in it ( ).
Once connected, refer to the Prime Owner’s
Manual for further instructions on how to use
the Amicus app and access its multiple functions.
The manual is available onscreen within the app
or in printed form.
You now have 2 ways to control the robot: (1) Us-
ing the Amicus app on the tablet with the Up-
grade Kit connected, or (2) Remove the Upgrade
Kit and use the original Control Panel and cable
that came with your robot.
