INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 40 of 68
16.0 STORING
If storing for long periods disconnect the main power
supply and take measures to protect the machine from
dust build-up. Lubricate parts that could be damaged
from drying out. When putting the machine back into
operation replace the rubber pads and the mounting
tool.
17.0 SCRAPPING
When the decision is taken not to make further use of
the machine, it is advisable to make it inoperative by
removing the connection pressure hoses. The machine
is to be considered as special waste and should be
dismantled into homogeneous parts. Dispose of it in
accordance with current legislation.
Instructions for the correct management of
waste from electric and electronic equip-
ment (WEEE) according to the Italian legis-
lative decree
49/14 and subsequent amend-
ments.
In order to inform the users on the correct way to
dispose the product (as required by the article 26,
paragraph 1 of the Italian legislative decree 49/14
and subsequent amendments), we communicate what
follows: the meaning of the crossed dustbin symbol
reported on the equipment indicates that the product
must not be thrown among the undifferentiated rub-
bish (that is to say together with the “mixed urban
waste”), but it has to be managed separately, to let the
WEEE go through special operations for their reuse or
treatment, in order to remove and dispose safely the
waste that could be dangerous for the environment and
to extract and recycle the raw materials to be reused.
Fig.
51
18.0 REGISTRATION PLATE DATA
The validity of the Conformity Declaration enclosed
to this manual is also extended to products and/or
devices the machine model object of the Conformity
Declaration can be equipped with.
Said plate must always be kept clean from grease
residues or filth generally.
ATTENTION: TAMPERING WITH,
CARVING, CHANGING ANYHOW
OR EVEN REMOVING MACHINE
IDENTIFICATION PLATE IS AB-
SOLUTELY FORBIDDEN; DO NOT
COVER IT WITH TEMPORARY
PANELS, ETC., SINCE IT MUST
ALWAYS BE VISIBLE.
WARNING: Should the plate be accidentally damaged
(removed from the machine, damaged or even par-
tially illegible) inform immediately the manufacturer.
19.0 FUNCTIONAL DIAGRAMS
Here follows a list of the machine functional diagrams.
7503-M002-6_B
NAV26HW - NAV26HW.S - NAV26HW.ST
