BUSKRO BK730-2 Скачать руководство пользователя страница 74

Страница: 74 / 157

Chapter 4

User

Interface

Page 4-16

4.6 Maintenance Schedule

The maintenance schedule in

Table 4-3

below applies to equipment operated daily on an

8-hour basis. If the equipment is to be used more frequently, the maintenance schedule

must be adjusted accordingly.

Table 4-3:

Head Maintenance Schedule

Period

Maintenance Function

Daily

Remove the front safety cover and clean any debris, which may have fallen
into the machine.

Remove any labels, which may have settled on the rollers and sensor bin.

Wipe debris off all sensors to prevent malfunction.

Inspect and clean the fan filter installed on the enclosure.

Monthly

Grease all moving parts to help reduce wear due to friction.

The peel point sensor must be cleaned to prevent material build up. An air
compressor is recommended.

Semi Annually

Examine all moving parts for wear. Replace if necessary.

Note

: Acquiring a small air compressor is recommended as compressed air is useful in

removing debris.

Buskro Ltd.

BK730-2 Tabber

Содержание BK730-2






























































































































































Результаты поиска

Содержание BK730-2

Отзывы:

Похожие инструкции для BK730-2

Бренды по названию

Популярные бренды

BUSKRO BK730-2, Руководство пользователя

Результаты поиска

Содержание BK730-2

Отзывы:

Похожие инструкции для BK730-2

Бренды по названию

Популярные бренды