manualshive.com logo in svg

BUSHWACKER POCKET STYLE 20072-02, Руководство по установке

Поделиться
Скачать
BUSHWACKER POCKET STYLE 20072-02 Скачать руководство пользователя страница 4

Using fl at end of supplied Edge Trim Tool (ET1-0002), 
seat edge trim against fl are by inserting straight end 
between edge trim and fl are at one end. Next, slide 
around entire edge to the other end.

Using supplied Edge Trim Tool (ET1-0002), seat 
edge trim against vehicle by hooking curved end 
under edge trim at one end of fl are. Next, slide 
around outer edge of fl are to the other end.

12

11

Edge Trim Tool Procedures

Completed rear fl are installation.

10

BUSHWACKER FENDER FLARES

TRUCK FENDER FLARES

Содержание POCKET STYLE 20072-02

Страница 1: ...t recommended use a flex additive Performance Using larger Tires may increase the area required to turn the vehicle Some Tire Rim combinations may require lowering bump stops and or installing steering stops to prevent tire from contacting flare Exhaust System Modifications may be necessary to maintain a minimum 4 clearance between flares and exhaust pipes Exhaust gases should not vent directly on...

Страница 2: ...059 2 3 1 Flare Pocket Hardware Installation Peel two to three inches of red vinyl backing away from Edge Trim GP1 0005 tape Applying the adhesive side of the edge trim to the inner side of the flare affix the edge trim to the top edge of the flare the portion that comes in contact with the vehicle Press edge trim into place along the top edge of the flare in one foot increments pulling red vinyl ...

Страница 3: ...Wrap a Tab MT1 0014 around the wheel well sheet metal centered over each of the six marks made in Step 5 Install a Clip CL1 0009 over each of the six Tabs MT1 0014 placed on the sheet metal in Step 6 6 7 Hold flare to vehicle and start Screw SW1 0058 through the two topmost holes in wheel well Then start Screws through remaining four holes in flare Tighten all Screws 8 Using a 10 mm socket wrench ...

Страница 4: ...d Next slide around entire edge to the other end Using supplied Edge Trim Tool ET1 0002 seat edge trim against vehicle by hooking curved end under edge trim at one end of flare Next slide around outer edge of flare to the other end 12 11 Edge Trim Tool Procedures Completed rear flare installation 10 BUSHWACKER FENDER FLARES TRUCK FENDER FLARES ...

Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды