_
6
_
Assembly
MC-E-2 (Edger Attachment)
Installing Guard
1. Install the collar onto the plate stud.
2. Install the guard onto the plate stud, making sure the
guard stud fits into the matching slot in the plate.
3. Install the flat washer, lock washer and hex nut onto the
plate stud.
4. Install the flat washer and knob onto the guard.
WARNING
POTENTIAL HAZARD
・
Foreign objects can be thrown by Edger.
WHAT CAN HAPPEN
・
Contact with thrown objects can cause personal injury.
HOW TO AVOID THE HAZARD
・
Never operate the Edger without the blade guard.
Hex Nut
Lock Washer
Guard
Guard Stud
Plate
Flat Washer
Knob
Plate Stud
Collar
Flat Washer
Installing Edger Blade
1. Install the boss adapter onto the attaching shaft out of the
gearcase.
2. Install the edger blade, clamping washer and blade bolt.
Note: The blade bolt has left-hand thread.
3. Align the hole in the boss adapter with the guide slot in the
gearcase.
4. Insert the 3mm hex wrench into the hole in the boss adapter
and the guide slot in the gearcase to lock the attaching
shaft.
5. Tighten the blade bolt to 11.3 Nm (100 in·lbs.).
6. Remove the 3mm hex wrench from the boss adapter and
gearcase.
WARNING
POTENTIAL HAZARD
・
If the Edger blade is not adequately tightened, it can
come loose from the Edger during use.
WHAT CAN HAPPEN
・
This may cause damage to property or personal injury.
HOW TO AVOID THE HAZARD
・
Make sure the Edger blade is securely fastened to the
attaching shaft in the gearcase.
Edger Blade
Clamping
Washer
Boss Adapter
Blade Bolt
Attaching Shaft
Holding Tool
(3mm Hex Wrench)
Gearcase
Left-hand
thread
Содержание MC-E-2
Страница 15: ......
Страница 16: ...P N 241976 00 GB 1905 IN 11 Sodium Street Narangba Qld 4504 ...