background image

11 

bushrangerpe.com.au

The blades in this Bushranger Lawn Mower are designed to cut grass. Drier than normal conditions and foreign 
objects can cause more wear. In time, these blades will wear and will need to be replaced in order to obtain 
maintain a clean cut on your grass. To replace blades, follow the procedure set out below:
1. 

Ensure that the engine is turned off and that all moving parts have come to a complete stop.

2. 

Remove the spark plug lead from the spark plug. 

3. 

Set height adjuster to position 1-11 (Refer Page 8).

4. 

Lower handles toward the ground and place heavy object on handles.

5. 

Remove blade disc or blade by loosening centre-mounting bolts.

6. 

Remove blades from disc by loosening mount bolts. 

7. 

Assembly is reversal of this procedure. 

• 

Stop engine and wait for all moving parts to come to a complete stop before attempting any of the above   

 checks.
• 

Do not tip machine for maintenance with the engine running and/or with oil in the engine. Drain engine of oil 

 

first if the machine must be tipped. This will ensure that oil does not run into the air filter, muffler or 

 carburettor.

Should difficulties persist after these recommendations have been attempted, please refer to your local authorised 
Bushranger Servicing Dealer.

TROUBLE-SHOOTING

REPLACEMENT OF BLADES 

!

 DANGER

!

 WARNING

!

 CAUTION

Shut engine down, ensure all 
rotating parts have stopped and 
remove spark plug lead before 
commencing maintenance work

If you are not confident in carrying 
out the following maintenance, or 
have difficulty understanding the 
instructions, consult an authorised 
Bushranger Servicing Dealer.

Blades are sharp and can cut you. 
Always wear gloves and use extra 
caution when servicing them.

PROBLEM

RECOMMENDED ACTION

Engine not starting

• 

Check fuel and oil levels

• 

Check “START-STOP” switch

• 

Check throttle and choke positions

• 

Ensure spark plug lead is connected

• 

Refer to the engine manual

Unusual noise and/or vibrations

• 

Check for loose blade/s –tighten blades

• 

Check for obstructions under mower or in catcher – 
clear obstruction

Engine running, blade not rotating

• 

Shut the unit off and take directly to a Bushranger 
servicing dealer for repair.

Mower clogging with material

• 

Grass to damp to mulch correctly – Lift height 
adjuster or allow grass to dry first

• 

Mowing too much grass at once

Содержание BUSH46THU6















Отзывы: