![background image](http://html1.mh-extra.com/html/bushranger/bruzcs5210/bruzcs5210_operators-manual_2835577009.webp)
9
OPERATOR’S MANUAL
– Included with unit. Read before operation and keep for future reference to learn proper, safe
operating techniques.
1. FRONT HAND GUARD / CHAIN BRAKE LEVER –
Guard between the front handle and the saw chain for protecting the hand
from injuries and aiding in control of the chain saw if the hand slips off the handle. This guard is used to activate the chain
brake which is to stop the saw chain rotation.
2. STARTER HANDLE –
The grip of the starter, for starting the engine.
3. AIR CLEANER COVER –
Covers air filter.
4. CHOKE CONTROL KNOB –
Device for enriching the fuel/air mixture in the carburettor to aid cold starting.
5. THROTTLE TRIGGER LOCKOUT –
A safety lever which must be depressed before the throttle trigger can be activated in
order to prevent the accidental operation of the throttle trigger.
6. REAR HANDLE (FOR THE RIGHT HAND) –
Extension on the lower part of the rear handle for protecting the hand from the
chain if it breaks or degrooves.
7. THROTTLE TRIGGER –
Device activated by the operator’s finger, for controlling the engine speed.
8. IGNITION SWITCH –
Device for connecting and disconnecting the ignition system and thus allowing the engine to be
started or stopped.
9. FUEL TANK CAP –
For closing the fuel tank.
10. OIL TANK CAP –
For closing the oil tank.
11. FRONT HANDLE (FOR THE LEFT HAND) –
Support handle located at the front of the engine housing.
12. CHAIN –
Chain, serving as a cutting tool.
13. GUIDE BAR –
The part that supports and guide the saw chain.
14. GUIDE BAR COVER –
Remove device for covering the guide bar and saw chain during transport and other times
when the chain saw is not in use
15. CLUTCH COVER –
Protective cover to the guide bar, saw chain, clutch and sprocket when the chain saw in use.
16. CHAIN TENSION ADJUSTER –
This is device to adjust chain tension.
17. CHAIN CATCHER –
A projection designed to reduce the risk of the operator’s right hand from being hit by a chain which
has broken or derailed from the guide bar during cutting.
18. SPIKED BUMPER –
Devise, fitted in front of the guide bar mounting point, acting as a pivot when in contact with
a tree or log.
19. CYLINDER COVER –
The cooling air flow grill. It covers the cylinder, spark plug, silencer and air cleaner.
20. CLEANER COVER KNOB –
Device for installing the air cleaner cover.
DESCRIPTION
Содержание BRUZCS5210
