![background image](http://html.mh-extra.com/html/bushranger/bru36v9501/bru36v9501_operators-manual_2835599016.webp)
16
CARE AND MAINTENANCE
Replacing The Cutting Blade
NOTE:
Only use authorised replacement parts.
Remove Battery
While wearing leather padded gloves, wedge a block of wood between the blade and the mower
deck in order to prevent the blade from turning when the nut (1) is being removed.
• Using an adjustable wrench or 15 mm socket, loosen the nut (1) and remove the washer (2) and blade (3). Turn the
nut “COUNTERCLOCK WISE” to loosen it and “CLOCKWISE” to tighten it.
• Remove the nut (1), the washer (2) and the blade (3).
• To re-install the blade, position the blade with the cutting edges toward the ground. Assemble the bolt and washer
as shown. Using a 15 mm socket or wrench, turn the blade nut “CLOCKWISE” in order to secure the blade. Torque
to 40-45 Nm
Cleaning The Mower
WARNING
In order to reduce the risk of electric shock, do not expose the mower to water. The underside of the mower deck
should be cleaned after each use, because grass clippings, leaves, dirt, and other debris will accumulate, which will
cause rust and corrosion.
Remove any build-up of grass and leaves on or around the motor cover
(do not use water).
Occasionally wipe the
mower clean with a dry cloth. If debris builds up on the underside of the mower during use, stop the motor, disconnect
it from the battery, and then tilt the mower on its side, and scrape it clean using an appropriate tool.
1
2
19
CARE AND MAINTENANCE
REPLACING THE CUTTING BLADE
WARNING
Always protect your hands by wearing heavy gloves and/or wrapping the cutting
edges with rags or other materials when performing any maintenance on the
blades. ALWAYS remove the battery when servicing or transporting the mower.
REMOVE BATTERY
While wearing leather padded glov es, wedge a block of wood between the blade and the mower
deck in order to prevent the blade from turning w hen the bolt (1) is being removed.
• Using an adjustable wrench or 27 mm socket, loosen the bolt (1) and remove the blade (2). Turn
the bolt “COUNTERCLOCK WISE” to loosen it and “CLOCKWISE” to tighten it.
• Remove the bolt (1) and the blade (2).
• To re-install the blade, position the blade with the cutting edges toward the ground. Assemble
the bolt as shown. Using a 27 mm socket or wrench, turn the blade nut “CLOCKWISE” in order
to secure the blade.
NOTE: Be sure to replace the parts in the exact order in which they were removed. When installing
the cutting blade, verify that it is installed with the curved ends pointing toward the mower deck, and
not toward the ground.
2
3