Bushranger BRU36v9101, Руководство оператора

Страница: 14 / 20

14
Maintenance
2
1
3
English |
21
1
1
RESPOOLING NYLON HEAD
Respooling nylon head refer to the below steps.
NOTE: Nylon head does not need to be removed off Line-Trimmer.
Push in tabs on both sides to remove
top cover. Refer to red circle.
Remove top cover. Remove spool from housing.
Spool will hold 2 meters of 2mm cord.
Find the middle of cord and make a
loop as shown in picture.
Loop cord into the slot as shown in
picture. On the spool there is an arrow showing
the direction on which way to wind the
cord on (Arrow, RH, wind line). Refer to
red circle.
Lock both ends of line in one of the four
slots on the spool. Refer to red circles.
Remove battery.