![background image](http://html.mh-extra.com/html/bushranger/7101e-rider/7101e-rider_operators-manual_2835598016.webp)
bushrangerpe.com.au
16
Disconnecting the Charger
Remember to disconnect the charger from the machine using this sequence:
1.
Pull the plug from the charger out of the wall outlet.
2.
Slide back the button C and turn the plug counter-clockwise, and then pull the plug from the plug from the socket
to disconnect the charger from the machine.
3.
Keep the charger out of reach of children.
Warning!
ALWAYS DISCONNECT THE CHARGER FROM THE ELECTRICAL (WALL) OUTLET FIRST, AND THEN DISCONNECT
THE ROUND CHARGER PLUG FROM THE MACHINE. IF YOU REMOVE THE ROUND CHARGER PLUG FIRST, THE
EXPOSED CONNECTOR COULD BE ACCIDENTALLY SHORT-CIRCUITED BY FOREIGN MATERIAL, WHICH MIGHT
CAUSE A FIRE.
Adjusting cutting height
•
Make sure you are properly positioned on the seat
attached to the unit.
•
Take hold of the Height Adjustment Lever A and pull it
to the right away from the graduator B.
NOTE:
keep a tight grip on the Height Adjustment lever
when adjusting.
•
From here you may adjust the Lever to your desired
cutting height. Also adjust the adjust ment lever securely
into one teeth of graduator.
Adjusting seat
•
To ensure comfort, you can use the seat lever to adjust
the position of the seat.
•
Push the lever C to left , so the seat can be moved to
desired position.
•
Release the lever C to re-lock the seat.
Raise mowing deck for
high cut
Cutting height adjustment
Lower mowing deck
for low cut
Fig 11
Fig 12
C
A
B