Bushranger 530SPB, Руководство пользователя

Страница: 12 / 24

OPERATING THE LAWNMOWER.
Recomme
nd
ed
check dime
nsi
on
3mm inside mower body.
CAUTION
Always disconnect the spark
plug lead when adjusting the blade, to prevent
accidental engine start.
The single lever height adjustment makes for easy change from one height setting to another.
There are ten height of cut settings available (from 10 mm to 65 mm) and the most suitable
height should be selected that best suits the grass and weather conditions. To adjust the height
of cut setting, follow the steps below.

Grip the height adjust lever by the black knob.

Apply an outward force to the lever to disengage it from the quadrant rack setting.

Holding the lever out, move the lever up
or down the quadrant rack to the desired
height of cut.

Engage the lever into the quadrant rack
by releasing the outward force.
Note that when using a mulching lawnmower,
using the higher height settings will give the
best mulching performance.
There are two holes in the axle bell cranks on
the left hand side of the mower. The correct
setting for the connecting rod link is to have
the rear of the link in the top hole and the front
of the link in the lower hole.
Cutting blade adjustment:
It is essential that the relationship between
the blade(s) and mower body is kept in good
adjustment and that cutting edges are kept
sharp to ensure good cutting performance,
8