Bushnell Voyager 78-9440, Руководство пользователя

Страница: 3 / 9

4.
Attach Accessory Tray
Locate the
Accessory Tray (8).
Using the accessory tray bolts, wingnuts and washers connect the
Accessory Tray
to the
Accessory Tray Braces (7)
. Start with one tripod leg and attach wingnuts.
Wingnuts should be positioned beneath the accessory tray. Do not tighten wingnuts until all
Accessory Tray Braces
are attached, as some adjustments may be required.
5.
Attach Eyepiece Accessories
Attach accessories as suggested in Intended Use Diagram. For example insert penta mirror
assembly into focusing tube, then insert desired eyepiece into penta mirror assembly.
6.
Remove Lens Cover
from
60mm Objective Lens(1).
Your Bushnell Voyager Telescope is now ready to be used. To obtain the fullest
enjoyment from your telescope, please refer to the additional information below.
HOW TO USE YOUR NEW TELESCOPE
Using the Penta Mirror Assembly:
1.
A Basic Description:
Bushnell is proud to present
the Exclusive Penta Mirror Technology. This
Penta Mirror Assembly provides the benefit of a
convenient 90-degree viewing angle commonly
associated with diagonal mirrors. However, the
Penta Mirror provides something that diagonal
mirrors cannot provide--right to left correct views of
the any object viewed through the telescope.
Unlike traditional diagonal mirrors that provide
backward images of objects seen on land and in
the night sky, the Penta Mirror allows correct
images to be viewed. The groundbreaking benefit
of this technology is that when viewing and
locating objects through the telescope, when you
want to move to the left, you move it to the left
intuitively instead of fumbling around the sky
becoming increasingly frustrated that you can’t
move the telescope the way your intuition tells you
that you need to move it. Objects on land at great
distances can be seen naturally (and readable) as
if you were many times closer to the object.
Objects in the sky appear as they appear in most
star charts. For the first time ever, you will be able
to see what you would expect resulting in excellent
viewing satisfaction. In addition, the penta mirror
has a special insert that is easily removed by
backing out the eyepiece set screw and removing
the insert to yield an 1.25” optical format receiver.
2. How-To-Use: Just like any traditional diagonal
mirror, place the eyepieces directly into the rear of
the Penta Mirror Assembly then place the Penta
Mirror directly into the back of the telescope
focusing tube, erecting lens or Barlow lens (See
Intended Configuration Diagram).
Insert
Penta Mirror
Fully Correct Image
Reversed Image
Upside-Down Image
Upside-Down & Reversed Image