Bushnell POWERSYNC PP1010, Быстрый старт

Страница: 5 / 28

Weight 3.1 oz / 88 g
Size 4.3 x 1.25 in. (18.25 in. fully extended)
Charge Time (USB Input) approx. 4 hrs.
Charge Time (via solar panel) approx. 10 hrs.
Power Output 5 volts, 1 amp (1000 mA)
Internal Battery Type Li Ion
USB Inputs / Outputs 1 / 1
Recommended Devices/# of
Charges*
(from fully charged internal
battery)
Cell Phones (inc Smartphones)/1x, MP3 Players/2x, Digital
Cameras/2.5x, Portable Gaming Devices/1.5x.
Note: Tablets and other
devices have higher power requirements and may not attain a full charge
from the SolarWrap Mini battery.
TECHNICAL SPECIFICATIONS
* Rechargeable batteries in electronic devices charge at different rates, depending on many factors including temperature, age and circuit
design. Bushnell provides examples of charges per device, based on typical product use and are not intended to be specific to any single device.
This device complies with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE. These limits are
designed to provide reasonable protection against harmful interference in a residential installation, and are more stringent than “outdoor”
requirements.
Operation of this device is subject to the following conditions; (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The device does not contain any user-serviceable parts. Repairs should only be made by an Authorized Bushnell repair center. Unauthorized
repairs or modifications could result in permanent damage to the equipment, and will void your warranty and your authority to operate
this device under Part 15 regulations.
The shielded interface cable which is provided must be used with the equipment in order to comply with the limits for a digital device
pursuant to Subpart B of Part 15 of FCC Rules.
FCC Compliance Statement