Bushnell Imageview 11-1025, Инструкция по эксплуатации

Страница: 11 / 20

11
Using the ImageView with Your Computer
1. the camera will be recognized as a USB mass storage device, which means no special
drivers are required for all operating systems later than Windows 98 (Me, 2000, XP,
Vista, and Windows 7.) Mac OS 9 and OSX are also compatible.
2. if you have a computer OS as listed above that is USB mass storage compliant, a
new disc icon will appear in Windows Explorer (under “My Computer”) as a new
“Removable Disc” after plugging in the USB cable from the imageview. Mac users will
see the new disc device appear on their desktop. Clicking on the new disc icon will
show the contents, a folder named “DCiM.” the image folder inside this contains your
photos, stored as JPEGs (.jpg file format). they may then be viewed, edited, renamed
and saved using any photo or graphics software that accepts .jpg files.
3. After you have copied or opened and saved the photo files to your computers hard
drive, you may disconnect the imageview camera (NEVER disconnect the camera
while files are still being transferred to your computer.) Before disconnecting, you
should “eject” or stop the "removable disc" representing the camera to avoid an error
message (not necessary with Windows XP or later OS).
4. See the following pages for full step by step instructions to download your photos.
System Requirements
Operating System: Windows® 2000/ME/XP/Vista/Windows 7
(Windows 98 is not supported) or Mac OS 9 / OS X
internal USB Port