Bushnell Image View 11-8200 v2, Инструкция по эксплуатации

Страница: 3 / 45

4
5
QUICK GUIDE: BUSHNELL IMAGEVIEW 11-8200
INSTALL BATTERIES
Insert 2 AAA batteries (alkaline, lithium, or NiMh) as indicated inside the battery compartment on
the bottom of the ImageView.
ADJUST THE BINOCULAR FOR COMFORTABLE VIEWING
Adjust the center focus knob while viewing a distant object through the binocular, until it appears
sharp. Move the left and right sides of the binocular closer together or farther apart until you see
a single circular image. Rotate the right eyepiece (diopter adjustment) to change the setting if the
image does not appear as sharp to your right eye as it does to your left eye.
TURN ON THE CAMERA
Press the MODE button, then release it when you see the LCD display in front of the button come
on. You will see a battery indicator and 3 digits indicating the number of photos taken (currently
stored in the internal memory). As you take new photos, this counter will advance. Press and hold
MODE to turn off the camera. You should download all photos before changing batteries or storing
the camera unused for a long period of time (more than a few weeks) as a precaution.
CHECK CAMERA SETTINGS
Make sure the camera is set for high resolution (“Lo” does not show on the LCD display-see full
instructions for setting photo quality) if you want the best results, especially if you will be printing
the photos. See “Changing Operational Modes” for full instructions in using features such as repeat
shot, video clips (avi mode), and deleting a photo you have just taken.