Align the red dot of the appropriate Camera Body Adapter to the red dot on the
camera housing and turn clockwise until snug.
Attach Telephoto Adapter (that is attached to spotting scope) to Camera Body
Adapter (this is attached to camera housing) by screwing in clockwise until snug.
When tightened, if the tripod-mounting plate is not on the same side as the
bottom of the camera for landscape photos or side of the camera for portrait
pictures, adjustments can me made. While the camera and spotting scope are
laying securely on a flat surface, using either a hex head or screwdriver (look at
adapter to determine which tool needed), barely loosen the three retainer screws
(see white arrow on picture above for location) and swivel the spotting scope to
the desired position. Tighten down the retainer screws. You are now ready to
use.
(Arrows show how spotting scope can be swiveled when retainer screws are loosened so that
tripod-mounting plate will be in position with desired camera portrait/landscape choice.)
