Bushnell 119932C, Инструкция по эксплуатации, Страница: 10 / 179

10
USING THE SETUP MENU TO CHANGE SETTINGS
The main purpose of the AIM mode is to allow you to change the settings of the
camera’s parameters so your Prime Trail Camera operates exactly the way you
want it to. You will do this by entering the SETUP Menu and pressing the keys
beside the LCD display, which will show you each parameter and its setting.
Changing Parameter Settings in SETUP Mode
A wide range of options or “parameters” are provided to allow you to set the Prime
Trail Camera to your operational preferences. To change the setting of any
parameter you must first switch to the AIM mode. Once in AIM mode, pressing the
MENU button will allow you to select any parameter and change its setting. The
name of the parameter and its current setting will be shown on the LCD. Pressing
the
RIGHT or LEFT key scrolls to the next or previous parameter ( RIGHT key to
move on to the next parameter and LEFT key to go back to the previous parame-
ter), and pressing the UP or DOWN key lets you select a different setting for the
currently displayed parameter. Once you have selected your preferred new setting
for a parameter, press the OK button to save the new setting (actually change it).
When you are finished changing the settings of one or more parameters, press
MENU again to exit the SETUP menu. MENU can also be pressed anytime you
want to cancel changing a parameter’s setting after a new setting has been selected
(but OK has not been pressed yet). After setting the parameters to your preferences,
be sure to move the switch to ON to begin actually taking photos or videos. No
images will be captured if the switch is left in the
AIM position (unless you press the
RIGHT/Shot key after exiting the menu) - in fact, the camera will power off
automatically after a few seconds with no key pressed.
To make the Parameter Settings easier, we have made the camera with 3 basic
settings (Set Clock / Mode / Interval) and an “
Additional Set ” which allows custom-
er to access to the full suite of settings if you turn the “ Additional Set ” on.