background image

Note: avoid any "overlap" of Field 

Scan A & B recording blocks when 

setting their start and stop times, 

to assure correct operation. 

5. After you finish setting the Stop minutes, press 

OK

 to confirm your

settings for the first block of Field Scan recording. If desired, you can
create a second block of time by pressing the 

DOWN

 key to select

"B" 

(Step 4)

, then press 

OK

 and follow the same process to set Start

and Stop times for Field Scan block "B" 

(Step 5)

. As an example of

how you might use these two available time blocks, you could setup
Field Scan time block "A" for the dawn hours from 6 AM to 8 AM, and 
block "B" to capture images between 5:30 and 7 PM. No Field Scan
recording would occur from 8AM to 5:30PM, or from 7PM to 6AM.

6. After setting Start/Stop times to define Field Scan block "A" and/or

"B", press 

OK

, then press the 

UP

 or 

DOWN

 key to select "Interval"

and press 

OK 

(Step 6)

. The Field Scan "Interval" setting lets you

control how often a photo or video clip is recorded during the block(s) 
of time you defined with the Start and Stop settings. Your options are
60 minutes, 30 minutes, 15 minutes, 5 minutes (this is the default), or
1 minute (still photo mode only). Use the 

UP/DOWN

 keys to select

your preference, then press OK to save it 

(Step 7). 

Note that for videos, 

"Interval" is independent of the Length of each video recording-it’s

how often

 videos are recorded, not how long each one lasts.

7. Here’s an example of how the camera would operate, based on the

following Field Scan settings:

Field Scan:

 On

Field Scan A:
[Start]:

 6:00

[Stop]:

 8:00

Field Scan B:
[Start]:

 17:30

[Stop]:

 19:00

Interval:

 15M

These settings would cause the camera to capture a photo (or video, 
if the camera is set to that mode) once every 15 minutes, beginning 
at 6 AM, until the Field Scan "A" recording block stops at 8:00 AM. 
Later that day, the camera would again take a photo or video every 15 
minutes between 5:30 PM and 7:00 PM (during Field Scan time block 
"B"). The next day, the camera would again record an image or video 
once every 15 minutes between 6:00 and 8:00 AM, and between 

Содержание 119837
































Отзывы: