March 2011
Page
27
of
30
How to Disconnect the Call
There are two ways to disconnect the call
1) At the main menu of the remote FastFix type: L<
CR
> for Logout
2) Type 3 + (plus) signs (Keypad) quickly (
example: +++
) ( Can be used with FastFix devices or any other modem device)
(N) aNswer Call
The (
N
) aNswer Call feature enables network operations to receive a call from a dial back modem. The example shown is from a remote Pushkablue
device unit that has a user set up called Dialback001.
When you have connected to the remote Pushkablue device and you have successfully entered your dial back user account and password(s) the
remote Pushkablue device will disconnect displaying the following message:
Will Dial Back in 30 Seconds…
Call Disconnected by Remote End
The dialling FastFix will return to the main menu
Type: N<
CR
>
This line will appear:
Waiting for connection (<ESC> to abort).
(
As shown, if you wish to abort the answer call function, press Esc key
)
Please wait for the remote FastFix to start its dial procedure (Normally 20-40 seconds)
You will after such time see:
Call coming in….
It takes approximately 10-15 seconds for the internal Pushkablue modems to synchronise.
Once this has been achieved, you will see:
Connected (Press +++ (keypad) to Disconnect call)
Login:
Login the same way you did before, in this case: Dialback001
