Bush WCDZ46, Инструкция по эксплуатации

Страница: 18 / 28

The wine cooler is designed to defrost automatically every 4 hours. The defrost process will last for 20 minutes.
During defrost, the compressor stops working and fan keeps on running for 20 minutes.
The wine cooler is equipped with an alarm that will sound if the door is left open for more than 60 seconds. Close door
or press any key once to switch off the alarm.
o o
It is recommended that you install appliance in a place where the ambient temperature is between 16 C - 32 C. If the
ambient temperature is above or below recommended temperature, the performance of the unit may be affected. For
example, placing your unit in extremely cold or hot conditions may cause interior temperatures to fluctuate. The
operation temperature range may not be reached.
To switch the power on/off
Press and hold the power button for 6 seconds to switch the wine cooler on.
Press and hold the power button for 6 seconds again to switch the wine cooler off.
To change the temperature
Continue to press the “+” or “-” buttons for the appropriate zone until the required temperature is shown on the display.
o o
The preset temperature is 8C/46F for the upper zone and 12 C/54 F for lower zone.
To change the temperature display from Fahrenheit to Celsius, or Celsius to Fahrenheit, press lower zone “+” and “-”
button at the same time for 2 seconds. Tips, please see the “ ” symbol on control panel.
The display shows the current internal temperature when the wine cooler is on.
Optimal temperature selection
o
Whilst wine is best stored at temperatures between 13 and 15 C , your wine can also be stored at drinking temperature.
o o
As a guide for red wine this is between 15 and 17 C, and for white wine between 12 and 13 C.
To use the internal light
Press the light button to switch the light on or off.
To turn the light ON when door opens, press the light button for 6 seconds, the display with show ‘OP_’ which means
door controls function is ON
To turn the light function OFF, press the light button for 6 seconds, the display will show ‘CL’, which means the door
control function is OFF.
To lock the whole panel
Press power button and “+” button at the same time for one second, all the buttons on panel will be locked.
Press power button and “+” button once again, all the buttons will be unlocked.
Tips, please see the “ ” symbol on control panel.
8 12
1 2 3 4 5 6
Key:
1 - Power button
2 - Upper zone
“+” button
3 - Upper zone
“-” button
4 - Lower zone
“+” button
5 - Lower zone
“-” button
6 - Light button
Defrosting
Door alarm
Controls
18
Upper zone display Lower zone display