Bush TT1608, Инструкция по эксплуатации

Страница: 16 / 28

Using your Turntable with Bluetooth
Let’s get started
Using your Turntable with Bluetooth
16
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Note : If necessary, refer to the instructions for your
device to add or set up Bluetooth.
4. When found, your Turntable will be displayed as
‘BUSH Turntable’. Select the device name to begin
pairing.
Note : If your device requests a password, please
enter ‘0000’ to complete the device pairing.
5. When pairing is complete the blue power LED will
change to flash slowly.
6.
Now that you have paired your device with the
Turntable, it will connect to it when it is within
range, which is about 10 metres or less (33 feet or
less), line of sight.
7. Your device will remain paired with the Turntable
unless you decide to disconnect or ‘unpair’ it.
Note : If your previously paired device is within range
but does not automatically connect, go to the
Bluetooth connectivity settings on your device and
select ‘BUSH Turntable’ to reconnect.
Controlling a paired Bluetooth
device
Once paired you can adjust the volume using the large
rotary volume control on the Turntable. You can also
use the controls on the connected audio device to
adjust the volume, play/pause, skip tracks etc.