Bush NE-6451, Инструкция по эксплуатации

Страница: 26 / 40

26
Using your DAB/ FM/ Internet Radio
Let’s get started
Using your DAB/ FM/ Internet Radio
FM Operation
Switching from DAB to FM Mode
To switch the unit to FM mode, press the MODE button
repeatedly to switch to FM mode.(F.8) The display will show
the frequency.
Auto Scan
- Press and hold the TUNING buttons to start searching for a station.
Manual Tuning
To search for
FM
stations manually, press the
TUNING
buttons repeatedly until your desired
frequency is reached.
The search may not stop at a station with a very weak signal
With FM radio, it may be necessary to fine tune each station by pressing the TUNING
buttons repeatedly. Each press will adjust the frequency by 0.05 MHz. If reception is still
poor, adjust the position of the aerial or try moving the radio to another location.
Scan Setting
1. Press the MENU button to access FM menu.
2. Press the / buttons to select Scan setting and then press the SELECT button to confirm.
3. Press the / buttons to select Yes to receive Strong stations only and then press the SELECT
button to confirm.
Audio Setting
1. Press the
MONO/ST.
button on the remote control to toggle between the Stereo or Mono
selection.
Alternatively,
1. Press the MENU button to access the main menu.
2. Press the / buttons to select Audio setting and press the SELECT button to confirm.
3. Press the / buttons to select YES to listen in Mono only or NO to let the unit select Stereo
or Mono automatically.
4. Press the
SELECT
button to confirm.
FM
radio
(F.8)