2. To set or change alarm 1, press
ALARM
button once, then press the
SELECT
button.
3. To set or change alarm 2, press the
ALARM
button twice, then press
the
SELECT
button.
4. In the alarm setting mode, press the
VOLUME/SNOOZE
button to
pause the alarm.
5. The alarm setup prompts you for the following parameters. Select a
value for each parameter by press
TUN/CH
▼
/
▲
buttons, and then
press the
SELECT
button to move on to the next parameter.
6. Parameters
„
On Time –Hours and minutes
„
Duration-15/30/45/60/90 minutes
If the alarm is not cancelled product returns to standby after this
time period
„
Source- Buzzer/DAB/FM
If DAB or FM is chosen as the audio source you will also be
prompted to select the last played station or one of the preset
station (if set)
„
Daily/Once/Weekends/Weekdays Choose the days on which the
alarm is active
Note:
if you choose “Once”, you are prompted to enter the
require date.
„
Volume – Rotate the Volume control increase or decrease the
volume you desired
This is the volume the alarm will build up to. (Initially the alarm
sounds at a low volume and gradually gets louder to the set
volume)
„
Alarm – Off/ On
∞ In all listening modes active alarms are indicated by displaying the
relevant Alarm 1 and or Alarm 2 icons.
∞ At the set time, the alarm will sound, quietly at first, then gradually
building up to the set volume. When an alarm sounds. The bell in the
display flashes.
To turn alarms on or off in standby mode
∞ Press the ALARM button, the display shows the current alarm status.
To switch the alarms on or off
∞ Press the ALARM button repeatedly to cycle through four states as
shown below (F.11)
11
Содержание NE-6005
Страница 1: ......
