Bush LSG60HSS, Инструкция по эксплуатации

Страница: 15 / 36

Installing your #VJMUJO(BT)PC
Bringing it all toget IFS
Installing your #VJMUJO(BT)PC
1 5
or online at www. CVTI - support. com If you still require further assistance, call one of our experts on 01759 487838.
NOTE:
If the built-in hob is being installed directly
above
a built-in oven, an additional spacer (not supplied)
may be required to maintain a clearance of 10
mm between the underside of the built-in hob
and the top of the built-in oven
Fig. .3 .
Any hob hood should be installed in accordance
with the hood manufacturer’s instructions.
Any splashback must be fitted in accordance with
the manufacturers instructions. Allowance should
be made for the additional height of the flue trim,
which is fitted to the cooker hob.
Surfaces of furniture and walls at the sides and rear
of the hob should be heat, splash and steam
resistant. Certain types of vinyl or laminate kitchen
furniture are particularly prone to heat damage and
discolouration.
We cannot accept responsibility for damage
caused by normal use of the hob to any
material that de-laminates or discolours at
temperatures less than 65°C above room
temperature.
For safety reasons curtains must not be fitted
immediately behind the hotplate.
10 mm
Clearance
Door
Wall
65 mm
Space for
connections
Fig. .2
Fig. .3
2 mm
Oven
*
Hob Worktop
Spacer
Front fascia
n
IMPORTAN
T
* To achieve a 10 mm gap clearance, a spacer may be
required when installing directly above a built-in oven.