Bush LE-55GB2A, Инструкция по установке и эксплуатации, Страница: 8 / 52

6
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Getting Started
Base Stand Assembly Instruction
1. Place the TV with the display side down on a
flat surface.Use a cloth to protect. Locate the
bottom at the stand.
2. Fix the bottom with turning the screw A
(6PCS) tightly on the stand.
3. Fix the stand base with turning the screw B
(6PCS) tightly on the stand support.
INSTALLATION NOTES
This TV can be connected to an AC 100-240 Volts,
50/60 Hz power supply. Never connect straight to a
DC power supply.
Locate the TV in a room where light does not strike
the screen directly. Total darkness or a reflection on
the screen can cause eyestrain. Soft and indirect
lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall
to permit ventilation.
Avoid excessively warm locations to prevent
possible damage to the cabinet or premature
component failure.
WALL MOUNTING INSTALLATION
GUIDELINES
This television can be wall mounted as follows:
1. Place the LCD Television onto a solid
surface. Please place some soft material over
the front of the screen to protect it from any
damage.
2. Remove the screws B (6PCS) from the lower
SDUWRIWKHWHOHYLVLRQZKHUHWKHEDVHMRLQV
WRWKH79DQGWDNHDZD\WKHVWDQGSXWWKH
stand somewhere safe for future use).
4. Use the four screws provided to fix the TV
onto a wall mounting bracket (not included)
via the four VESA standard holes on the
back of the television.
Installing / Removing the Base Stand
400 x 400mm VESA mount
400mm
400mm
BUSH-LE-55GB2 （TI12421）_IM V01.indd 6 2012/10/22 15:13:43