LATITUDE SERIES
6
Carefully remove your
DAB+ Receiver
from the box. You may wish to store the packaging for future use.
In the Box
Inside the box you will find:
DAB+ Radio (Main Unit)
Power Adapter
User Guide
Positioning your DAB+ Radio
Place your
DAB+ Receiver
on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
Where the radio will be exposed to direct sunlight.
Where the radio will be close to heat radiating sources.
Where the humidity is high and ventilation is poor.
Where it is dusty.
Where it is damp or there is a possibility of water dripping or splashing onto unit.
Adjusting the Aerial
The aerial should be extended to ensure you receive the best reception possible in both DAB+ and FM radio modes. It
may be necessary to alter the position of the
DAB+ RADIO
and /or aerial to achieve the best signal.
Using Headphones
You will require headphones fitted with a 3.5 mm diameter stereo plug. The headphone jack is located on the back of
this unit. Headphones are not supplied with this
DAB+ Receiver.
Turning the Unit On/Off
Connect the power adapter to the DC Jack on the back of the unit. Then insert the power adapter into the wall outlet.
Turn the mains power on and then press the
POWER
button to turn on the unit, when you want to turn the unit off,
simply press the
POWER
button again.
Getting Started
