10
If a 13 Amp (BS 1363) plug is used, a 13 Amp Fuse must be fitted, or if any other type of Plug
is used, a 13 Amp Fuse must be fitted, either in the Plug or Adaptor, or on the Distribution
Board.
Trouble Shooting
This useful guide may help you to check the appliance before contacting the after sales service.
Note: the compressor starts up and in operation may produce some background noise and it is
normal, this is not a defect.
Problem
Possible cause
Solution
Appliance does not start
The mains plug is not plugged
in.
Insert the mains plug.
Protection devices or fuses of
the electrical system at home
open
Check the protection devices
and fuses.
Light does not work
Failure bulb
Replace the bulb per section
Clean and care
"
"
Appliance not cool
enough
Cooling system not settle
after transportation
Leave the appliance at least 4
hours before switching on
Doors not close properly
Clean per section Clean and
care
"
"
Check any food blockage
Frequently doors open
Loading food too much
Low temperature setting
Door seal dirty or sticky
Reduce the frequency
Reduce the food quantity
Adjust the temperature knob
Food frozen in fridge
compartment
High temperature setting
Adjust the temperature knob
Noisy appliance
Not position on even surface
Install on even surface and
leveling the appliance
Appliance is touching objects
around
Bottles and containers are
contacting with each other
Ensure spacing at both sides
and above the appliance
Separate them
BUSH FRIDGE FREEZER
| USER MANUAL
Customer Helpline: 0845 600 4632
