Bush ESI01U, Инструкция по эксплуатации

Страница: 38 / 60

Using your Stereo DAB/FM Radio
Let’s get started
If you require any technical guidance or find that your product is not operating as
intended, a simple solution can often be found in the Troubleshooting section
Using your Stereo DAB/FM Radio
38
Note:
If reception is still poor try adjusting the aerial or
moving the radio to another location.
Changing the Scan setting
In FM mode:
1.
Short press the Menu button (under the top cover), FM
<Scan setting> will be displayed. Short press the rotary
control to select.
The current Scan setting will have an ‘*’ in the display.
There are two different options to choose from:
Strong stations: The scan will only stop when a strong signal
strength is received which should also result
in a better audio quality. It is possible that the
station you are scanning for may be missed
using this option.
All stations:
The scan will stop for every station it receives,
even if the signal strength is poor.
2. Use the rotary Tune/Select control to choose from the two
options available and press to select.
3. Short press the Menu button to exit the Menu options.
Audio mode
The radio will automatically switch between Stereo and Mono,
depending on the quality of the signal being received but you
can override this function and manually switch between Stereo
and Mono.