10
Mobile data connection
In order to get mobile data you must have the appropriate service from your
network provider; some plans are for calls and texts only. For most major networks
your SIM will connect with the network automatically. However, some networks
may require you to do some manual set up to get started. In this case you will get
a message from them telling you how to set up. Check to see if you already have
network connection before making any changes in settings. Note that you will only
be able to get mobile data (4G) if the area you are in is covered by signal from your
network provider. When connected to the 4G network, the 4G icon is displayed in
the status bar. If 4G is not available your phone will default to lower bit rate services
(2G).
Mobile Data & WiFi connection
Activating/Deactivating the mobile data
1. Touch and pull down the status bar to display it.
2. Touch Expand to reveal all the quick settings.
Select All Settings.
3. Select Network & Internet, then Cellular & SIM.
4. Slide the Data connection switch to turn on/
off.
3
2
4
Bush_5_Windows_10_book(AC50Cesium).indd 10
02/12/2015 10:22:06
