Bush ELED22FHDS, Инструкция по эксплуатации

Страница: 24 / 60

Media Playback via USB Input
You can connect 2.5” and 3.5” inch (HDD with external
power supply) external hard disk drives or USB memory
stick to your TV by using the USB inputs of the TV.
IMPORTANT!
Back up the files on your storage devices
before connecting them to the TV. Manufacturer will not
be responsible for any file damage or data loss. Certain
types of USB devices (e.g. MP3 Players) or USB hard disk
drives/memory sticks may not be compatible with this
TV. The TV supports FAT32 and NTFS disk formatting.
Wait a little while before each plugging and unplugging as
the player may still be reading files. Failure to do so may
cause physical damage to the USB player and the USB
device itself. Do not pull out your drive while playing a file.
You can use USB hubs with your TV’s USB inputs. External
power supplied USB hubs are recommended in such a
case.
It is recommended to use the TV’s USB input(s) directly,
if you are going to connect a USB hard disk.
Note: When viewing image files the Media Browser
menu can only display 1000 image files stored on the
connected USB device.
Media Browser
You can play back music and movie files and display
photo files stored on a USB storage device by connecting
it to your TV. Connect a USB storage device to one of the
USB inputs located on the side of the TV.
After connecting a USB storage device to your TV
Media
Browser
menu will be displayed on the screen. You can
access the content of the connected USB device any time
later from the
Sources menu. Select the related USB input
option from this menu and press
OK
. Then select the file
of your choice and press OK to display or play it back.
You can set your Media Browser preferences by using
the Settings menu. Settings menu can be accessed via
the information bar which is displayed on the bottom of
the screen when pressed the
Info button while playing
back a video file or displaying a picture file. Press the Info
button, highlight the gear wheel symbol positioned on
the right side of the information bar and press
OK
.
Picture
Settings , Sound Settings , Media Browser Settings and
Options menus will be available. The contents of these
menus may change according to the type of the currently
open media file.
Only Sound Settings menu will be
available while playing back audio files.
Loop/Shuffle Mode Operation
Start playback and
activate
All files in the list will be
continuously played in original
order
Start playback and
activate The same file will be played
continuously (repeat)
Start playback and
activate All files in the list will be played
once in random order
Start playback and
activate
,
All files in the list will be
continuously played in the same
random order.
To use the functions on the information bar highlight
the symbol of the function and press
OK
. To change the
status of a function highlight the symbol of the function
and press
OK as much as needed. If the symbol is marked
with a red cross, that means it is deactivated.
FollowMe TV
With your mobile device you can stream the current
broadcast from your smart TV using the
FollowMe TV
feature. Install the appropriate Smart Center application
to your mobile device. Start the application.
For further information on using this feature refer to the
instructions of the application you use.
Note:
Depending on model, your TV may not support
this function. The application may not be compatible with
all mobile devices. UHD (4K, Ultra HD) channels are not
supported and both of the devices must be connected
to the same network.
CEC
This function allows to control the CEC-enabled devices,
that are connected through HDMI ports by using the
remote control of the TV.
The
CEC option in the Settings>System>More menu
should be set as
Enabled
at first. Press the
Source
button
and select the HDMI input of the connected CEC device
from the
Sources List menu. When new CEC source
device is connected, it will be listed in source menu with
its own name instead of the connected HDMI ports
name(such as DVD Player, Recorder 1 etc.).
The TV remote is automatically able to perform the main
functions after the connected HDMI source has been
selected. To terminate this operation and control the TV
via the remote again, press and hold the “0-Zero” button
on the remote control for 3 seconds.
Advanced features
Getting the most from your TV
Advanced features 22
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,