Bush DWINT15LC, Инструкция по эксплуатации

Страница: 36 / 40

Using your Dishwasher
36
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Product support
Help is always at hand
Automatic Fault Warnings
PRACTICAL INFORMATION
1.When the machine isn’t in operation:
•
Disconnect the plug and close the tap.
•
Leave the door slightly open to prevent odur formation.
2.Select the dry option to remove water droplets.
3.Place dishes in the machine properly to achieve the best energy consumption, washing and
drying performance. Please see the programme and consumption table for more information.
4.Rinse dirty dishes before placing them in the dishwasher.
5.Only use the Prewash programme when necessary.
6.Do not place the machine near a refrigerator because it will reach high temperatures.
7.If the machine is located in an area that is at risk of freezing, close the tap, disconnect the inlet
hose from the tap and drain the water inside the hose and the machine completely.
TROUBLE CODE POSSIBLE FAULTW HAT TO DO
P1 P2 P3 P4 P5
Insufficient water
Make sure the water inlet tap is open
and water is flowing.
Separate the inlet hose from the tap and
clean the filter of the hose.
Contact for service if the error continues.
Continuous water
input
Close the tap and contact for service.
Inability to
discharge water
Water discharge hose and filters may
be clogged.
Cancel the programme.
If the error continues, contact for
service.
Contact for service.
Faulty heaterC ontact for service.
Overflow
Unplug the machine and close the tap.
Contact for service.
Faulty electronic
card
Contact for service.
OverheatingC ontact for service.
Faulty heater
sensor
Contact for service.