Bush DAB30, Инструкция по эксплуатации

Страница: 23 / 27

Product support
Help is always at hand
Product support
Help is always at hand
Product support
Product support
44
45
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021 .
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Troubleshooting
If you are experiencing problems with your radio, there are some quick and easy checks
that you can do, which may help to solve the problem.
No sound / power:
Adjust the volume using the rotary control on your radio.
Check that the mains power wall socket is switched on and that your radio is not in
Standby mode.
You may have headphones connected. Either use the headphones to listen to your radio
or unplug the headphones.
If you are using a Bluetooth connected device, increase the volume on the secondary
device and on your radio
If you have batteries fitted, they may be exhausted and need to be replaced. Please use
only good quality C size batteries.
Radio reception is poor:
Fully extend the aerial to get the best reception and sound quality.
Retune for radio stations, see pages 22 and 26.
Try moving your radio to another location to see if reception improves.
Check that you do not have other electrical equipment too close to your Radio, causing
interference.
Visit www.digitalradionow.com for information about DAB reception in your area.
Unable to pair with a Bluetooth device:
Check that you are in Bluetooth mode.
Ensure that you are within range of the radio for Bluetooth functionality, 10 metres or less
(33 feet or less).
Move the radio and Bluetooth device away from other Bluetooth devices/electrical
equipment.
If possible, turn off other nearby Bluetooth devices or disable their Bluetooth functionality.
The function buttons do not respond:
Check that the mains power lead is connected at the back of your radio and the mains
power wall socket is switched on. Press and release the Power button.
Check that you are trying to use the function buttons for the mode that you are in. (Play/
pause, Skip forward and Skip back will only work in Bluetooth mode).
If you are using batteries, they may be exhausted and need to be replaced.
Unplug the mains power and remove the batteries. Leave the radio for 3 minutes and
then reconnect the power.
Try a reset to factory defaults. See page 36.
Note: All of your settings, including the radio station list and any presets will be deleted
when you reset the Radio.