Bush CTT5, Инструкция по эксплуатации

Страница: 13 / 28

Getting to know your Turntable
You’ll be up and running in no time
Getting to know your Turntable
13
section of these instructions, or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on
0345 600 3021
.
Connecting to an external sound system
Should you wish to connect the turntable to an external amplifier follow the below steps.
1. Connect an RCA audio cable (not supplied) to the AUDIO LINE OUT sockets on the
rear of the turntable.
Take care to match the RED/WHITE plugs to the corresponding RED/WHITE sockets.
2. Connect the other end of the cable to an AUDIO INPUT on the amplifier (check your
amplifier user manual if you are not sure).
3. The volume control on the turntable will have no effect on the volume level when
connected this way. All volume controls should be operated from the amplifier.
Turn the volume on the turntable all the way down, so it does not interfere with the
external sound system.
AUX IN R L DC 5V 1A