Pairing a device
Pairing is the process of connecting your blueooth enabled audio device
(e.g. smartphone) to the CSPKJ1 bluetooth speaker.
1.
Power on the CSPKJ1 bluetooth speaker if not already. While the
BLUETOOTH status LED (1) is flashing (blue) the speaker is in pairing
mode & ready for connections. if not press and hold the UNPAIR/LIGHT
button 6) on the bottom of the speaker.
2.
Enable Bluetooth on your audio device (For example a smartphone) and
search for available bluetooth connections. Select the CSPKJ1 from the
list. If you are asked for a pass code enter ‘1234’. The BT LED will stop
flashing once connected.
If you turn off either device before pairing is complete the process will
need to be repeated when powered ON again.
3.
Once paired an audible sound is heard through the bluetooth speaker.
Each time you power the CSPKJ1 bluetooth speaker on the device will
automatically connect, unless you have un-paired the device on your
bluetooth audio device.
4.
You can now begin playback from the audio device and the output will
playback through the CSPKJ1 bluetooth speaker.
5.
When using a mobile phone as an audio source and you receive a
phone call the audio playback stops while you receive the call. When
you hang up the audio is restored.
The volume output level is controlled by the volume level on the audio
source
(e.g. smartphone).
6.
To un-pair (disconnect) a bluetooth device, press the UNPAIR/LIGHT
button (5) on the bottom of the speaker. The CSPKJ1 bluetooth speaker
will now revert to search mode, and be available for new connections.
Controlling a connected device
Once connected you can either use the controls on the audio device to
play or pause.
Or you can use the control buttons on the CSPKJ1 bluetooth speaker.
1.
During music playback from your bluetooth
audio device (e.g. smartphone), short press the
POWER/
button (6) found on the bottom of
the speaker to pause the playback. Press again
to resume playback.
2.
Alternatively you can touch the top speaker grill
to pause or play audio.
(Fig 1)
3.
Selection of next or previous tracks must be
operated from the bluetooth audio device (e.g.
smartphone).
Light effect
There are five different colour modes which can be cycled through by
pressing the UNPAIR/LIGHT button (5). See the below descriptions of each
effect.
SLOW FADE:
Colours slowly fade from one into the next at an interval of 5
seconds.
FAST FADE:
Colours quickly fade from one into the next at an interval of 2
seconds.
ONE COLOUR:
Press to retain the colour when it appears.
PULSE TO MUSIC:
Lights flash to the beat of the music being output.
Fig 1.
1) Slow fade (FADE) default mode
2) Fast fade (FAST)
3) One colour (COLOUR)
4) Pulse to music (PULSE)
5) Off (no light effect)
1) Slow fade (FADE) default mode
2) Fast fade (FAST)
3) One colour (COLOUR)
4) Pulse to music (PULSE)
5) Off (no light effect)
1) Slow fade (FADE) default mode
2) Fast fade (FAST)
3) One colour (COLOUR)
4) Pulse to music (PULSE)
5) Off (no light effect)
1) Slow fade (FADE) default mode
2) Fast fade (FAST)
3) One colour (COLOUR)
4) Pulse to music (PULSE)
5) Off (no light effect)
OFF:
no light effect
Care and maintenance
After use
•
Power off the player.
Care and cleaning
•
All care and cleaning operations should be carried out with the unit
unplugged from a PC/ laptop/charger.
•
Occasionally wipe the cabinet with a lint free duster. Never clean the
unit with liquids or solvents.
Technical specification
Specification
Rating
Dimensions
80 x 80 x 138mm
Speaker power
5 MAX watts, 3.5w RMS @ 10% THD
Weight
360g
Interface
Micro USB
Bluetooth version
4.2
Battery
3.7V 2600mAh
Troubleshooting
Problem
Solution
No power
The player requires charging.
No sound
The volume level is too low.
Playback has not been initiated.
The speaker has not been paired correctly
with a bluetooth audio device (for example a
smartphone).
Sound is distorted
Lower the volume.
Cannot charge the
player
The pc/ laptop/ charger USB port may be
damaged. Try another port/ charger.
Disposal
• Disposal of your old product. Your product is designed and
manufactured with high quality materials and components, which
can be recycled and reused
• When this crossed out wheeled bin symbol is attached to a
product it means the product is covered by the European Directive
2002/96/EC.
• Please make yourself aware of the local collection system for
electrical and electronic products.
• Please act according to your local rules and do not dispose of your
old products with your normal household waste.
• The correct disposal of your old product will help prevent potential
negative consequences for the environment and human health.
Rechargeable battery disposal
Your product contains a built-in rechargeable battery covered by the
European Directive 2006/66/EC + amendment 2008/103/EC.
To safeguard the functionality and safety of your product, always take
your product to an official collection point or service centre where a
professional can remove the battery.
Please inform yourself about the local rules on separate collection
of batteries because the correct disposal will help prevent negative
consequences for the environmental and human health. Please do not
dispose of your batteries with your normal household waste. Always bring
your product to a professional to remove the battery.
This product complies with Electromagnetic compatibility (2014/30/EU)
directives.
This product is intended for use within the UK.
Declaration of Conformance
Hereby Argos LTD declares that the radio equipment type Bush CSPKJ1 is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: http://www.argos-support.co.uk
Bluetooth Frequency Band 2.4Ghz.
Maximum radio-frequency power transmitted within above frequency
band: 20dBm EIRP
1) Slow fade (FADE) default mode
2) Fast fade (FAST)
3) One colour (COLOUR)
4) Pulse to music (PULSE)
5) Off (no light effect)
