Page 5
User instructions
Speaker connections
R
SPEAKER
+
-
L
+
-
LINE-IN
Connect the speaker wires as shown above.
1:
Take the
RIGHT
speaker cable and insert the
WHITE
cable into the
RED
terminal on the rear of the unit
marked with an
‘R’
. You will need to push the
RED
spring clip towards the rear of the unit to allow the
wire to be inserted .
2:
Repeat the process for the
BLACK
cable from the
RIGHT
speaker . But insert this wire into the
BLACK
terminal underneath the
RED
one also marked
‘R’
.
3:
Take the
LEFT
speaker cable and insert the
WHITE
cable into the
RED
terminal on the rear of the unit
marked with an
‘L’
. You will need to push the
RED
spring clip towards the rear of the unit to allow the
wire to be inserted .
4:
Repeat the process for the
BLACK
cable from the
LEFT
speaker . But insert this wire into the
BLACK
terminal underneath the
RED
one also marked
‘L’
.
Power supply & standby
Connecting the mains power
Before connecting the power, ensure all the speaker
connections (above) are correct & secure.
1:
Connect the mains plug to a
UK
mains outlet .
2:
Switch the
UK
mains outlet
ON .
3:
Press the
POWER
button
(9)
on the main unit .
4:
Press the
STANDBY
button either on the remote
control
(21)
or on the main unit
(2)
.
Standby function
This function will enter a power saving mode that
enables the unit to be quickly powered on.
1:
Press the
STANDBY
button either on the remote
control
(21)
or on the main unit
(2)
to wake the unit
from
STANDBY
mode .
2:
To enter
STANDBY
mode press the
STANDBY
button
either on the remote control
(21)
or on the main unit
(2)
.
NOTE: This unit is designed to enter STANDBY
mode automatically after 20 MINUTES of
inactivity. Press the STANDBY button to wake the
unit.
General operation
Mute
1:
To temporarily silence playback of any mode press the
MUTE
button
(36)
on the remote control .
2:
Press once more to resume the audio output .
Volume controls
1:
Press the
VOL+
button
(39)
on the remote control
or rotate the
VOLUME
control
(11)
clockwise on the
main unit to increase the volume level .
2:
Press the
VOL-
button
(38)
on the remote control or
rotate the
VOLUME
control
(11)
anti-clockwise on the
main unit to increase the volume level .
Switching modes
1:
Press the
SOURCE
button on the remote control
(48)
or main unit
(5)
repeatedly until you reach the
required input .
NOTE: When in CD or USB mode. If no disc is
found, but a USB device is the unit will switch to
USB mode. Likewise if a disc is found but no USB
drive then CD mode will be selected.
Содержание CMC361DABBT
Страница 1: ...Instruction Manual CMC361DABBT ...
